top

 

Lab refrigerator

The temperature inside your Laboratory refrigerators can very easily be Monitor and logged in real time, with the TENAK LabLogger.

The temperature inside your Laboratory refrigerators can very easily be monitored and logged in real time, with the TENAK LabLogger. 

There is no need for an external PT100/PT1000 sensor, instead just place the LabLogger directly in the lab refrigerator and the temperature and humidity data will be logged in real time to your login at mylog.tenak.com. 

Set-up alarms and insures the quality and integrity of your valuable samples. Mylog.tenak.com will notify you by email if the temperature is changing and conditions is varying outside the thresholds specified by you. 

In Mylog you can quickly get an overview of the temperature in your connected laboratory refrigerators and with preconfigured reports quickly see temperature development over time. The TENAK LabLogger is ideal for documenting that your samples are stored at the most optimal temperature and securing that the refrigerators in your lab is always performing.

Add a door contact to your Lab refrigerator and make sure that no refrigerator door is left open again. With the door contact in place, you can get a notification when a door is open for a longer duration than what you have specified. 

Every time the door open and closes, it will be logged in Mylog for documentation purposes. Use the report overlay in mylog and get valuable knowledge about the connection between door open time and the temperature development.

GET STARTED

What you need

All you need to start monitoring temperature is a internet connection,
one LabBird, one LabLogger and a login to mylog.tenak.com.